|
1. Insert the key into the lock and
turn counter-clockwise to unlock.
2. Remove the lock and lid from the
machine and place to the side.
3. Lift the globe assembly straight
up and off the center rod.
5. Discard any product clippings/dust
in the bottom of the globe.
6. Before pouring the product into
the globe, use your finger to rotate the dispensing
wheel (A). Line up one of the three
openings in the dispensing wheel (A)
with the hole in the hopper (B). Align
these two openings with the chute (C)
when replacing the globe assembly back onto the body
of the machine.
7. Gently pour the product into the
machine.
8. Place the lid back onto the machine.
9. Replace the lock onto the machine
and tighten.
ATTENTION: DO NOT OVER TIGHTEN THE LOCK.
|
